Differences

This shows you the differences between two versions of the page.

--- client:gdefaults [2018/04/15 15:30]
karl [displaymode] Add SDL headline and text.
+++ client:gdefaults [2018/04/19 07:04] (current)
karl [map_width] Add link to server::config_h for max supported mapsize
@@ Line 4: / Line 4: @@
 This file applies to the old **gtk-1** client for crossfire, \\
 The newer gtk-2 client uses the [[gdefaults2]] file as configuration file. \\
+This configuration file does not exist in a fresh installation of the client. \\
+This file gets created by pressing the 'Save' button in the client configuration sub window \\
+found in the Menubar > Client > Configure .
 At the top of the file one reads :
@@ Line 12: / Line 16: @@
 # 'True' and 'False' are the proper cases for those two values
 # 'True' and 'False' have been replaced with 1 and 0 respectively
 </code>
 The code in function //load_defaults()// in file //client/gtk/config.c// parses as follows :
 <code c>
         if (inbuf[0]=='#') continue;
-	/* IF no colon, then we certainly don't have a real value, so just skip */
+    /* IF no colon, then we certainly don't have a real value, so just skip */
-	if (!(cp=strchr(inbuf,':'))) continue;
+    if (!(cp=strchr(inbuf,':'))) continue;
-	*cp='\0';
+    *cp='\0';
-	cp+=2;	    /* colon, space, then value */
+    cp+=2;      /* colon, space, then value */
-	val = -1;
+    val = -1;
-	if (isdigit(*cp)) val=atoi(cp);
+    if (isdigit(*cp)) val=atoi(cp);
-	else if (!strcmp(cp,"True")) val = TRUE;
+    else if (!strcmp(cp,"True")) val = TRUE;
-	else if (!strcmp(cp,"False")) val = FALSE;
+    else if (!strcmp(cp,"False")) val = FALSE;
 </code>
 Meaning, that lines starting with **#** are ignored, \\
@@ Line 30: / Line 34: @@
 and may have any content, but digits *not* **-1** , \\
 and still recognizes **True** or **False** in case sensitive string comparison.
+----
 ===== Entries =====
@@ Line 37: / Line 43: @@
   - [[#command_window]]: < 1 - 127 >
   - [[#darkness]]: < 0 | 1 >
-  - [[#displaymode]]: < 0 | 1 | 2 > [ CFG_DM_PIXMAP , CFG_DM_SDL , CFG_DM_OPENGL ]
+  - [[#displaymode]]: < 0 | 1 > [ CFG_DM_PIXMAP , CFG_DM_SDL ]
   - [[#download_all_images]]: < 0 | 1 >
   - [[#echo_bindings]]: < 0 | 1 >
@@ Line 67: / Line 73: @@
   - [[#tooltips]]: < 0 | 1 >
   - [[#trim_info_window]]: < 0 | 1 >
+----
 ==== auto_apply_container ====
+Range: 0 - 1 | False | True \\
+Default: 1 \\
+Menu Entry: Client > Configure > General "Automatically re-applies a container when you use apply to close it. \nIf off, when you use apply to close the container, it stays unapplied" \\
+Command Line Parameter: //None//
 ==== cacheimages ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > Map & Image "Cache Images" \\
+Command Line Parameter: [[optional_parameters#-cache]] , [[optional_parameters#-nocache]]
 ==== command_window ====
+Range: **1** - **127** \\
+Default: **10** \\
+Menu Entry: Client > Configure > General "Command Window" \\
+Command Line Parameter: //None//
+Functions:
+  * init_client_vars()
+    * File: client/common/init.c
+    * want_config[CONFIG_CWINDOW] = COMMAND_WINDOW;
+    * File: client/common/client.h #define COMMAND_WINDOW 10
+  * CButtons cbuttons[MAX_BUTTONS] = {
+    * File: client/gtk/config.c
+    * {NULL,        SPIN_CWINDOW,   CONFIG_CWINDOW, FLAG_UPDATE, "Command Window"},
+  * configdialog(GtkWidget *widget)
+    * File: client/gtk/config.c
+    * else if (cbuttons[i].type == SPIN_CWINDOW) adj = (GtkAdjustment *) gtk_adjustment_new(want_config[cbuttons[i].config], 1, 127, 1, 5, 5);
+  * load_defaults()
+    * File  client/gtk/config.c
+    * **Warning**: No check for upper and lower limit, might work beyond 127 and uncertain if set < 1
 ==== darkness ====
+Range: 0 - 1 | False | True \\
+Default: 1 \\
+Menu Entry: Client > Configure > Map & Image "Enable darkness code - if off, all spaces will not be dimmed." \\
+Command Line Parameter: [[optional_parameters#-darkness]] , [[optional_parameters#-nodarkness]]
+The darkness code is provided by the server handling the [[:player_commands#time]] , [[:spells]] and maps with the archetype attribute [[:arch:arch_attributes:d#darkness]] set.
+**Note**: Seems not to work to set the  [[#lighting]] value to  CFG_LT_NONE when function //applyconfig()// is called. \\
+The client handles the want_config[CONFIG_DARKNESS] value only at it's startup in //load_defaults()// . \\
+If the CONFIG_LIGHTING is set to greater than zero, then the darkness code will be always enabled. \\
+Since the user has no possibility to select CFG_LT_NONE in the configuration GUI, darkness will be always enabled. \\
+:!: BUG: The only possibility to disable the darkness code, is to set [[#lighting]] manually to False | 0 . \\
+CONFIG_DARKNESS is not used anywhere else in the code except while checking commandline parameters and loading defaults; \\
+while CONFIG_LIGHTING is applied in //client/common/mapdata.c// and //client/gtk/sdl.c// .
+Functions:
+  * init_client_vars()
+    * File: client/common/init.c
+    * want_config[CONFIG_DARKNESS] = TRUE;
+  * load_defaults()
+    * File: client/gtk/config.c
+    * want_config[i] = val;
+    *if (!want_config[CONFIG_LIGHTING]) {
+    * LOG(LOG_WARNING,"gtk::load_defaults","No lighting mechanism selected - will not use darkness code");
+    * want_config[CONFIG_DARKNESS] = FALSE;
 ==== displaymode ====
-The displaymode entry can have two ( three ) values for drawing the map:
+Range: 0 - 1 | False | True \\
-  * 0 Pixmap
+Default: 0 \\
-  * 1 SDL ; command line option [[optional parameters#-sdl]]
+Menu Entry: Client > Configure > Map & Image "SDL Image Support (Take effect next run)" \\
-  * 2 OpenGL ; command line option [[optional parameters#-opengl]] ; ( GTK-2 client only )
+Command Line Parameter: [[optional_parameters#-sdl]]
+The displaymode entry can have two values for drawing the map:
+  * 0 : Pixmap
+  * 1 : SDL ; command line option [[optional parameters#-sdl]]
 Any other numerical values than those above will still be "acknowledged" by the client, but will lead to error messages  as \\
-''[WARNING ] (common::finish_face_cmd) Got error on create_and_rescale_image_from_data, file=HOME/.crossfire/image-cache/la/lava_S.113.base.1'' \\
+''[ ERROR  ] (Library::Gdk-CRITICAL) file gdkdraw.c: line 89 (gdk_draw_rectangle): assertion `drawable != NULL' failed.'' \\
 and \\
-''[WARNING ] (common::display_newpng) create_and_rescale_image_from_data failed for face 481'' \\
+''[ ERROR  ] (Library::Gdk-CRITICAL) file gdkdraw.c: line 379 (gdk_draw_pixmap): assertion `drawable != NULL' failed.'' \\
+and \\
+''[ ERROR  ] (Library::Gdk-CRITICAL) file gdkdraw.c: line 380 (gdk_draw_pixmap): assertion `src != NULL' failed.'' \\
 , thus the map would not be drawn.
 === SDL ===
 If the SDL libraries were not available at [[client compiling]] time, then the displaymode would fall back to Pixmap mode. \\
+The client then does not print anything to stderr from function //load_defaults()// in //client/gtk/config.c// \\
-**GTK-1:** The client then does not print anything to stderr from function //load_defaults()// in //client/gtk/config.c//
+to inform the user about it:
 <code c>
 #ifndef HAVE_SDL
-	/* If SDL is not built in, having SDL mode turned on causes many issues. */
+    /* If SDL is not built in, having SDL mode turned on causes many issues. */
     want_config[CONFIG_DISPLAYMODE] = CFG_DM_PIXMAP;
 #endif
 </code>
-**GTK-2:** The client then should print to stderr from function //load_defaults()// in //client/gtk-v2/config.c//
+See also [[#lighting]] modes for SDL.
-<code c>
-#if !defined(HAVE_SDL)
-    if (want_config[CONFIG_DISPLAYMODE] == CFG_DM_SDL) {
-        want_config[CONFIG_DISPLAYMODE] = CFG_DM_PIXMAP;
-        LOG(LOG_ERROR, "config.c::load_defaults", "Display mode is set to SDL, but client "
-            "is not compiled with SDL support.  Reverting to pixmap mode.");
-    }
-#endif
-</code>
-See also [[#lighting]] .
-=== OpenGL ===
-The OpenGL mode is available on Linux, if the MESA package is found at compilation time. \\
-If the gdefaults2 entry is set to 2, and MESA was not found at compilation time, \\
-<del>the client acts differently than started with the -opengl parameter.</del> \\
-the client prints \\
-''[ ERROR  ] (config.c::load_defaults) Display mode is set to OpenGL, but client is not compiled with OpenGL support.  Reverting to pixmap mode.'' \\
-to the logging output.
-When using OpenGL displaymode, the GLX and probably DRI extensions should be available to the X-Server, \\
-when the X-Server Xorg is started to manage the monitor of the computer. \\
-When the GLX extension is not available for the X-Server, then the client will either crash with \\
-message ''Xlib:  extension "GLX" missing on display ":0.0".'' and ''Segmentation fault'' as for \\
-version 1.10.0 for example; or \\
-printing ''Direct rendering is not available!'' to the loglevel INFO log output as it is for version 1.70.0 of the client, \\
-and still would work in OpenGL drawing mode if  libGL.so.1, libGLU.so.1 and libglut.so.3 are available on the system ( but GLX disabled for the X-Server ) .
-Special kdrive X-Servers disbanded after version 1.4.x of the Xorg R7 release like Xvesa, \\
-likely will not work with MESA and DRI. \\
-The Xorg's own driver vesa_drv.so and probably some special framebuffer drivers will also not work \\
-with OpenGL / MESA.
-Screenshot of Scorn at nighttime of the client's opengl mode for the intel_drv.so driver: \\
-{{opengl_scorn-400.jpg}}
 ==== download_all_images ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > Map & Image "Download All Image Information (Takes effect on next server connection)" \\
+Command Line Parameter: [[optional_parameters#-download_all_faces]]
 ==== echo_bindings ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > General "Echo Bound Commands" \\
+Command Line Parameter: [[optional_parameters#-echo]] , [[optional_parameters#-noecho]]
+When set, should print the commands issued to the server by keypress in the informational window.
+See also [[:player_commands]] .
 ==== faceset ====
+Range: standard | classic \\
+Default: standard \\
+Menu Entry: Client > Configure > Map & Image \\
+Command Line Parameter: [[optional_parameters#-faceset]]
 ==== fasttcpsend ====
+Range: 0 - 1 | False | True \\
+Default: 1 \\
+Menu Entry: Client > Configure > General "Fast TCP Send (May improve performance at expense\n of outgoing bandwidth)" \\
+Command Line Parameter: [[optional_parameters#-fasttcpsend]] , [[optional_parameters#-nofasttcpsend]]
 ==== fog_of_war ====
+Range: 0 - 1 | False | True \\
+Default: 1 \\
+Menu Entry: Client > Configure > Map & Image "Fog of War" \\
+Command Line Parameter: [[optional_parameters#-fog]]
+The "Fog of War" is mere a "Line of Sight" handler, since cleared areas do not become covered by inscrutable "mist" again, \\
+except for [[#darkness]] may gray out cleared areas again.
 ==== foodbeep ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > General "Beep When Food is Low" \\
+Command Line Parameter: //None//
+The client issues beep tones to the beep speaker of the computer, when the nourishing level gets below 200,
+and each time the nourishing level is decremented by 1.
 ==== grad_color_bars ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > General "Gradually change stat bar color based on value of the stat.\nThis option will result in some extra CPU usage." \\
+Command Line Parameter: //None//
+When unset, the status bars for HP, SP, GR, Food do not change coloration according to their current amount.
 ==== iconscale ====
+Range: **25** - **200** \\
+Default: **100** \\
+Menu Entry: Client > Configure > Map & Image  "Icon Scale (Takes effect next run)" \\
+Command Line Parameter: [[optional_parameters#-iconscale]]
+Functions :
+  * init_client_vars()
+    * File: client/common/init.c
+    * want_config[CONFIG_ICONSCALE] = 100;
+  * configdialog(GtkWidget *widget)
+    * File: client/gtk/config.c
+    * if (cbuttons[i].type == SPIN_SCALE) adj = (GtkAdjustment *) gtk_adjustment_new(want_config[cbuttons[i].config], 25, 200, 1, 5, 5);
+  * load_defaults()
+    * File  client/gtk/config.c
+    * if (want_config[CONFIG_ICONSCALE]< 25 || want_config[CONFIG_ICONSCALE]>200)
 ==== lighting ====
+Range: **0** - **3** \\
+Default: **1**  \\
+Menu Entry: Client > Configure > Map & Image "Lighting options, per pixel is prettier, per tile is faster.\nIf the darkness code is off, the pixel/tile options will be ignored."
+  * 0 : //set by darkness//
+  * 1 : "Per Tile Lighting"
+  * 2 : "Fast Per Pixel Lighting"
+  * 3 : "Best Per Pixel Lighting (slowest)"
+Command Line Parameter: //None//
+**Note**: When not set (0, CFG_LT_NONE), should disable [[#darkness]] code.
-SDL lighting in pictures: City of Navar around midnight .. \\
+Functions:
+  * client/common/client.h:
+    * /* CONFIG_LIGHTING can have several possible values - set them accordingly */
+    * #define CFG_LT_NONE    0
+    * #define CFG_LT_TILE    1
+    * #define CFG_LT_PIXEL   2
+    * #define CFG_LT_PIXEL_BEST  3
+  * init_client_vars()
+    * File: /client/common/init.c
+    * want_config[CONFIG_LIGHTING] = CFG_LT_TILE;
+  * load_defaults()
+    * File: client/gtk/config.c
+    * if (!want_config[CONFIG_LIGHTING]) want_config[CONFIG_DARKNESS] = FALSE;
+  * CButtons cbuttons[MAX_BUTTONS] = {
+    * File: client/gtk/config.c
+    * {NULL, RBUTTON, 100 + CFG_LT_PIXEL_BEST, FLAG_MAPPANE, "Best Per Pixel Lighting (slowest)"},
+    * {NULL, RBUTTON, 100 + CFG_LT_PIXEL, FLAG_MAPPANE, "Fast Per Pixel Lighting"},
+    * {NULL, RBUTTON, 100 + CFG_LT_TILE, FLAG_MAPPANE, "Per Tile Lighting"},
+  * applyconfig()
+    * File: client/gtk/config.c
+    * else if (cbuttons[onbutton].type == RBUTTON) {
+    * /* We know that the only radio buttons currently in use are those for
+    * lighting.  IF other radio buttons are added later, this should be changed. */
+      * if ( GTK_TOGGLE_BUTTON (cbuttons[onbutton].widget)->active) {
+      * if ( cbuttons[onbutton].config >= 100 &&  cbuttons[onbutton].config < 200)
+      * lighting = cbuttons[onbutton].config - 100;
+    * **Note**: applyconfig does not work correctly for almost all configuration options to apply them immediately "on the fly" - but for the lighting settings, it works.
+=== SDL lighting in pictures ==
+ City of Navar around midnight ..
 ^ lighting 0 None ^ lighting 1 Per Tile ^ lighting 2 Fast per Pixel ^ lighting 3 Best per Pixel ^
 | {{sdl_lightning_0_none.jpg?180}} | {{sdl_lightning_1_per_tile.jpg?180}} | {{sdl_lightning_2_fast_per_pixel.jpg?180}} | {{sdl_lightning_3_best_per_pixel.jpg?180}} |
 ==== map_height ====
+Range: **9** - **31** ( see function //load_defaults()// in //client/gtk/config.c// ) \\
+Default: **11** ( see function //init_client_vars()// want_config[CONFIG_MAPHEIGHT] = 11; in //client/common/init.c// ) \\
+Menu Entry: Client > Configure > General "Map Size: Larger map lets you see more information, but takes more CPU\npower and bandwidth.  Changing these will not take effect until the next time\nyou connect to a server" \\
+ "Map Height" \\
+Command Line Parameter: [[optional_parameters#-mapsize]] \\
+**Note**: The server has a maximum map size hardcoded to send to the client set as **25** by default. \\
+See topic [[:server:compiling_the_server:config_h#mapsize]] for MAP_CLIENT_Y .
 ==== map_width ====
+Range: **9** - **31** ( see function //load_defaults()// in //client/gtk/config.c// ) \\
+Default: **11** ( see function //init_client_vars()// want_config[CONFIG_MAPWIDTH] = 11; in //client/common/init.c// ) \\
+Menu Entry: Client > Configure > General "Map Width" \\
+Command Line Parameter: [[optional_parameters#-mapsize]]
+**Note**: The server has a maximum map size hardcoded to send to the client set as **25** by default. \\
+See topic [[:server:compiling_the_server:config_h#mapsize]] for MAP_CLIENT_X .
 ==== mapscale ====
+Range: **25** - **200** \\
+Default: **100** \\
+Menu Entry: Client > Configure > Map & Image "Map Scale (Takes effect next run)" \\
+Command Line Parameter: [[optional_parameters#-mapscale]]
+Functions :
+  * init_client_vars()
+    * File: client/common/init.c
+    * want_config[CONFIG_MAPSCALE] = 100;
+   * CButtons cbuttons[MAX_BUTTONS] = {
+    * File: client/gtk/config.c
+    * {NULL,        SPIN_SCALE,     CONFIG_MAPSCALE,    FLAG_MAPPANE, "Map Scale (Takes effect next run)"},
+  * configdialog(GtkWidget *widget)
+    * File: client/gtk/config.c
+    * if (cbuttons[i].type == SPIN_SCALE) adj = (GtkAdjustment *) gtk_adjustment_new(want_config[cbuttons[i].config], 25, 200, 1, 5, 5);
+  * load_defaults()
+    * File  client/gtk/config.c
+    * if (want_config[CONFIG_MAPSCALE]< 25 || want_config[CONFIG_MAPSCALE]>200)
 ==== mapscroll ====
+Range: \\
+Default: 1 \\
+Menu Entry: //not available// \\
+Command Line Parameter: [[optional_parameters#-mapscroll]] , [[optional_parameters#-nomapscroll]]
 ==== message_timestamping ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > General "Timestamp Messages" \\
+Command Line Parameter: //None//
+when set, adds a HH:MM Hour:Minute tag to each message printed in the informational window.
 ==== nosplash ====
+Range: 0 - 1 | False | True \\
+Default: 1 \\
+Menu Entry: Client > Configure > General "Splash Window" \\
+Command Line Parameter: [[optional_parameters#-splash]] , [[optional_parameters#-nosplash]]
 ==== popups ====
 Values : 0 or 1 -- 0 disables popup windows like a separate log-in window, 1 enables them. \\
-Default: 0 ( disabled )
+Default: 0 ( disabled ) \\
+Menu Entry: Client > Configure > General "Popup Windows" \\
+Command Line Parameter: [[optional_parameters#-popups]] , [[optional_parameters#-nopopups]]
 The default is set to **0** inside the source code \\
 in function init_client_vars() in file common/init.c as variable want_config[CONFIG_POPUPS] = FALSE; .
-Command-line options : [[optional_parameters#-popups]] and [[optional_parameters#-nopopups]]
 Behaviour: Most popup-windows might be annoying, while playing the game, but the log-on to a server had been impossible for versions 1.11.0 and below of the GTK-1 client, if that was unset ( 0 ) . To enter a user-name was not possible in the "traditional" Info-Message and Cmd-Line Pane on the right side of the client. \\
 See also
   * ChangeLog [[changelog_0_92_1_70_0#Popups not the default anymore]]
   * ChangeLog [[changelog_0_92_1_70_0#Popups @ v.1.12.0 client GTK1 mixed with GTK2 can not login]]
   * ChangeLog [[changelog_0_92_1_70_0#Keyboard input impossible or confusing]]
   * known_client_issues [[:known_client_issues#Keyboard input impossible or confusing]]
   * bugs [[bugs#Pressing a keyboard key activates the command-line]]
 ==== port ====
+Range: \\
+Default: \\
+Menu Entry: //not available// \\
+Command Line Parameter: [[optional_parameters#-port]]
 ==== resistances ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > General "Display resistances in two columns rather than only one." \\
+Command Line Parameter: [[optional_parameters#-resists]]
+The value **0** prints resistances in 1 column, the value **1** prints them in two columns.
 ==== server ====
+Range: \\
+Default: \\
+Menu Entry: //not available// \\
+Command Line Parameter: [[optional_parameters#-server]]
 ==== show_grid ====
+Range: 0 - 1 | False | True \\
+Default: 0
+Client Menu: Client > Configure > Map & Image > "Print Grid Overlay (SDL only, Slow, useful for debugging/development" \\
+Command Line Parameter: //None//
 This option is only available for the SDL [[#displaymode]] . \\
 Purpose: It draws a red tile grid-overlay onto the map. \\
-Effect: But this grid vanishes as soon as the player moves. \\
+Effect: The grid vanishes as soon as the player moves. The player has to apply it each move in the configuration sub window. \\
 Implemented: gridline options available under the client config window. //MSW 2001-06-17// \\
-Client Menu: Client > Configure > Map & Image > Print Grid Overlay (SDL only, slow, useful for debugging, development)
 The GTK-2 client does not have such a Menu option to choose anymore; but still has this parameter entry in it's [[gdefaults2]] config file.
 ==== showicon ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > General "Show Inventory Icon" \\
+Command Line Parameter: [[optional_parameters#-showicon]]
+Adds a notebook tab to the inventory window, where the items in the inventory are just drawn without any text.
 ==== sign_popups ====
+Range: 0 - 1 | False | True \\
+Default: 1 \\
+Menu Entry: Client > Configure > General "Popup Sign Windows (need [[#popups|Popup]] Windows checked to be used)" \\
+Command Line Parameter: //None//
 ==== smoothing ====
+Range: 0 - 1 | False | True \\
+Default: 0   \\
+Menu Entry: Client > Configure > Map & Image "Enable smoothing - Use additionnal CPU (Take effect on next connection)." \\
+Command Line Parameter: [[optional_parameters#-smooth]] , [[optional_parameters#-nosmooth]]
 ==== sound ====
+Range: 0 - 1 | False | True \\
+Default: 1 \\
+Menu Entry: Client > Configure > General "Sound" \\
+Command Line Parameter: [[optional_parameters#-sound]] , [[optional_parameters#-nosound]]
+When enabled, raises a sound server, but sound had been broken for a long time. \\
+The server has to send sound effect commands to the client.
 ==== sound_server ====
+Range: \\
+Default: cfsndserv \\
+Menu Entry: //not available// \\
+Command Line Parameter: [[optional_parameters#-sound_server]]
 ==== split ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > General "Split Windows" \\
+Command Line Parameter: [[optional_parameters#-split]]
+When set, the client GUI will be split into several small windows, instead of one single window.
 ==== splitinfo ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > General "Split Information Window (Takes effect next run)" \\
+Command Line Parameter: [[optional_parameters#-splitinfo]]
+The information window to the right side of the GUI can be split into two areas. \\
+The upper area the usually draws coloured messages, while the lower part draws the common black messages.
 ==== tooltips ====
+Range: 0 - 1 | False | True \\
+Default: 1 \\
+Menu Entry: Client > Configure > General  "Show Tooltips" \\
+Command Line Parameter: //None//
-==== trim_info_window ====
+Tooltips are the small text popups that appear when hoovering with the mouse pointer about areas.
+==== trim_info_window ====
+Range: 0 - 1 | False | True \\
+Default: 0 \\
+Menu Entry: Client > Configure > General "Trims text in the information window - " \\
+ "improves performance but bugs in\n gtk make the client unstable if this is used." \\
+ "This may work better with gtk 2.0" \\
+Command Line Parameter: [[optional_parameters#-triminfowindow]] , [[optional_parameters#-notriminfowindow]]
+When set, limits the scrollback buffer of the information window to ~100 thousand chars.

Crossfire Wiki

User Tools

Site Tools

Differences

Page Tools